Hydra Squat Stand Builder (3" x 3", ⅝" Holes)
Minimalist design meets maximum power. Portable, stable & expandable.
Build Your Rack
Customize your Rack
- 108" | 275cm
- 90" | 228cm
- 84" | 213cm
- 72" | 183cm
Choose Your Depth
-
62" | 157cm Flat Foot Attachment
Hydra Flat Foot Components
Upgrade your non-flat-foot Hydra (or 3"x3" with 5/8" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only. Reinforcement plates are required for safety, and include the necessary hardware for overall assembly.
£94.99+ ADD -
56" | 142cm Flat Foot Attachment
Hydra Flat Foot Components
Upgrade your non-flat-foot Hydra (or 3"x3" with 5/8" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only. Reinforcement plates are required for safety, and include the necessary hardware for overall assembly.
£99.99+ ADD
Pull-Up Bar
-
Adjustable Straight Pull Up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it!
The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights.
Choose the option that suits your power rack or cable tower.
2.3" x 2.3" version:
- Fits 2.3" racks & Cable Tower Squat Stands
- 1.25" diameter
- bare steel finish
- includes hitch pinsHydra version:
- Fits 43" wide Hydra racks
- 1.25" diameter
- light textured black powder coat finish
- includes hitch pinsManticore version:
- Fits 43" wide Manticore racks
- 1.25" diameter
- light textured black powder coat finish
- includes quick-locking mag pins
- UHMW lining inside to protect your rackIMPORTANT: Hardware included. The 2.3" pull-up bar is NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them. Pull-up bar attachments will not fit on your lever arms when added to an All-in-One Trainer due to the width of the All-in-One uprights.
£59.99+ ADD -
43" | 109cm Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
£49.99+ ADD -
Globe Pull Up Bar + 43" | 109cm Crossmember
Coloured Globe Pull up Bar
£214.99+ ADD
Rack Safeties
-
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.
Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.
- 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.
- Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
- Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.
IMPORTANT: The Spotter Arms have a weight capacity of 800lb/362kg (60mm) & 1,000lb/453kg (Hydra & Manticore).
£119.99+ ADD
J-Cups
-
Hydra J-Cups
Standard J-Cups
These tried-and-true J-Cups have UHMW protection on all sides to keep your bar evenly distributed and secure while withstanding enthusiastic re-rackings. They're more basic than pumpkin spice season, but they do the trick.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. UHMW triple-padding protects your bar & features a 700lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
IMPORTANT: Choose the correct J-Cup version for the uprights and hole size on your power rack. Sold in pairs.
£64.99+ ADD -
Roller J-Cups
Roller J-Cups
Our innovative Roller J-Cups make solo benching a dream. Hefty build with durable nylon rollers to protect your barbell while making adjustments smoother than Usher on roller skates. For all the bench press lovers out there, this is a must.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Includes durable nylon rollers & features a 600lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features an 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
£99.99+ ADD -
Sandwich J-Cups
Sandwich J-Cups
The robust Sandwich J-cups are heavy-duty and a serious plus when using a safety squat bar. The beefy sandwich design, abrasion-resistant lining, and sloped backing protect your bar and you while re-racking.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Thick HDPE padding protects your bar & features an 880lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional HDPE inside to protect your rack.
£99.99+ ADD -
Monolift Rack Attachment
Monolift Rack Attachment
The adjustable Monolift Attachment offers a space-saving and inexpensive monolift solution.
UHMW plastic lined to preserve your barbell during enthusiastic re-rackings, with nylon rollers for easier bar adjustments.
The upgraded cantilever-style swing-back design improves bar clearance for squats and presses, creating more room to squat deep and lift heavy.
Easy to set up and adjust-just place the pin and drop it in. Perfect for solo handoffs, so you can save every bit of energy to hit that next PR.
£289.99X OUT OF STOCK
Rack Attachments
-
72" | 182cm Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
£559.99+ ADD -
84" | 213cm Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
£564.99+ ADD -
90" | 228cm Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
£584.99+ ADD -
84" | 213cm Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
£1,099.99+ ADD -
90" | 228cm Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
£1,139.99+ ADD
-
Smith Machine Rack Attachment - Bar Included
Smith Machine Rack Attachment
BREAKING NEWS: the stigma against Smith machines is over! This Smith Machine Rack Attachment will supercharge your size & strength in an ultra-compact footprint. Now, if only mullets would come back in style…
This widely compatible unit upgrades your 3” x 3” power rack into a beloved bodybuilding beast without the hefty price tag or space requirements.
Bring your own 25-30mm diameter barbell (BYOB) for a higher starting weight and to optimize the attachment for your next training cycle. Or, snag the hollow 36lb Smith bar for an easier assembly & one-and-done solution for all exercises. With a 600-pound total weight capacity, it’s ready for your heaviest ambitions.
Mount this rack attachment on the inside of your rack without taking up any additional footprint in your gym, or attach it to the outside — sitting just 10" off your uprights! Change between a straight or angled bar path with a few simple adjustments to the mounting brackets, making its fixed path feel as natural as possible for your body.
Hit all the staple lifts: squats, presses, rows, and Bulgarian split squats (why are they ALWAYS here?!). But that’s just the start. Incorporate heavy negatives on compounds. Isolate individual muscles with JM presses. You can even rehab stubborn aches in your posterior chain with single-leg Romanian deadlifts.
Recommended Set-Up: Mount the upper brackets to the top of your uprights & the lower brackets to your crossmembers (inside rack) or front foot stabilizers (outside rack). Brackets can be mounted to your uprights only, but a dropped bar could permanently damage the unit.
Bells of Steel Compatibility Chart
The Smith Machine Attachment is compatible with the following Hydra & Manticore racks.
The Bar Included version also fits 47" wide racks by placing the spacers on the inner side of each mounting bracket — watch this video for more compatibility details.
Rack Type
BYOB & Bar Included
4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"6 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Flat Foot 4 Post / Squat Stand Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Folding 4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
- Width:
- 47" (Manticore only) & 49"
*When mounted, your rack can't fold unless the bar is removed.84" Light Commercial Rack Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Non-BoS Rack Compatibility: The Smith attaches to most non-BoS power racks with the following:
- Tubing between 2.3" x 2.3" and 3" x 3"
- 72" or taller uprights
- 47" or 49" width
- 5/8" or 1" side holes£519.99+ ADD -
Smith Machine Rack Attachment - BYOB
Smith Machine Rack Attachment
BREAKING NEWS: the stigma against Smith machines is over! This Smith Machine Rack Attachment will supercharge your size & strength in an ultra-compact footprint. Now, if only mullets would come back in style…
This widely compatible unit upgrades your 3” x 3” power rack into a beloved bodybuilding beast without the hefty price tag or space requirements.
Bring your own 25-30mm diameter barbell (BYOB) for a higher starting weight and to optimize the attachment for your next training cycle. Or, snag the hollow 36lb Smith bar for an easier assembly & one-and-done solution for all exercises. With a 600-pound total weight capacity, it’s ready for your heaviest ambitions.
Mount this rack attachment on the inside of your rack without taking up any additional footprint in your gym, or attach it to the outside — sitting just 10" off your uprights! Change between a straight or angled bar path with a few simple adjustments to the mounting brackets, making its fixed path feel as natural as possible for your body.
Hit all the staple lifts: squats, presses, rows, and Bulgarian split squats (why are they ALWAYS here?!). But that’s just the start. Incorporate heavy negatives on compounds. Isolate individual muscles with JM presses. You can even rehab stubborn aches in your posterior chain with single-leg Romanian deadlifts.
Recommended Set-Up: Mount the upper brackets to the top of your uprights & the lower brackets to your crossmembers (inside rack) or front foot stabilizers (outside rack). Brackets can be mounted to your uprights only, but a dropped bar could permanently damage the unit.
Bells of Steel Compatibility Chart
The Smith Machine Attachment is compatible with the following Hydra & Manticore racks.
The Bar Included version also fits 47" wide racks by placing the spacers on the inner side of each mounting bracket — watch this video for more compatibility details.
Rack Type
BYOB & Bar Included
4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"6 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Flat Foot 4 Post / Squat Stand Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Folding 4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
- Width:
- 47" (Manticore only) & 49"
*When mounted, your rack can't fold unless the bar is removed.84" Light Commercial Rack Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Non-BoS Rack Compatibility: The Smith attaches to most non-BoS power racks with the following:
- Tubing between 2.3" x 2.3" and 3" x 3"
- 72" or taller uprights
- 47" or 49" width
- 5/8" or 1" side holes£539.99+ ADD
-
Band Pegs with Carabiners
Band Pegs with Carabiners
Band Pegs are designed to help strengthen those sticking points and blast through plateaus. Use bands to add resistance to squats, rack pulls, benching, and more. The carabiners offer extra security if you have nightmares about bands coming unhooked and slapping you silly. Select the band pegs that match your power rack specs. Sold in pairs.£19.99+ ADD -
Standard Band Pegs
Standard Band Pegs
Band Pegs are classic band pegs to help strengthen those sticking points and blast through plateaus.
Use bands to add resistance to squats, rack pulls, benching, and more. Select the band pegs that match your power rack specs. Sold in pairs.
£29.99+ ADD -
Adjustable Straight Pull-up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it!
The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights.
Choose the option that suits your power rack or cable tower.
2.3" x 2.3" version:
- Fits 2.3" racks & Cable Tower Squat Stands
- 1.25" diameter
- bare steel finish
- includes hitch pinsHydra version:
- Fits 43" wide Hydra racks
- 1.25" diameter
- light textured black powder coat finish
- includes hitch pinsManticore version:
- Fits 43" wide Manticore racks
- 1.25" diameter
- light textured black powder coat finish
- includes quick-locking mag pins
- UHMW lining inside to protect your rackIMPORTANT: Hardware included. The 2.3" pull-up bar is NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them. Pull-up bar attachments will not fit on your lever arms when added to an All-in-One Trainer due to the width of the All-in-One uprights.
£59.99+ ADD -
Landmine Attachment
Landmine Rack Attachment
Take your training to new angles with the Landmine Rack Attachment! This mighty rack attachment brings a whole new dimension to your strength workouts, from explosive landmine presses to rotational core work.
The Standard version fits any rack with 5/8" holes (including 60mm & Hydra racks) provided the tubing length or width is no greater than 3". It boasts a beefy 315lb capacity with a UHMW-lined sleeve to protect your favorite Olympic barbell as you squat, press, row, Viking Press, and twist to target different muscle groups for an explosive workout.
The Manticore version fits Manticore racks & non-Bells of Steel racks with 1″ holes and width or length no greater than 3″. Boasting a beefy 315lb capacity, it rotates in two axes instead of one for smoother landmine workouts and locks into your rack more securely using a mag pin with UHMW protection for your rack. The inner UHMW sleeve protects your barbell and the locking pin keeps it secure so your heavy training session doesn't blow up in your face.
Manticore Landmine Version 2.0 includes a mag pin and a smaller mounting bracket to occupy even less space on your rack.
Recommended Accessories:
- Viking Press
- Fat Bar T-Bar Row Cable Attachment
- 30” D Handle Bar paired with Handles£49.99+ ADD -
Y Dip Attachment
Y Dip Bar Rack Attachment
The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time.
This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage.
Easily install and adjust the height with a simple drop pin. With a 500lb weight capacity, you can throw on a Dip Belt and some Weight Plates for some extra flair.
Choose the Y Dip Attachment that matches your power rack specs.
IMPORTANT: If your rack is not bolted to the ground or otherwise secured, you must use the Y Dip Attachment on the inside of your rack.
£79.99+ ADD -
Seal Row Pad
Seal Row Pad Rack Attachment
Minimize fatigue, so you can finally push your back muscles to their limit! Maintain your form with chest support, minus the bulky bench. This streamlined rack attachment installs and adjusts quickly and easily, unlocking more than just seal rows-use it for flies, hip thrusts, incline curls, or a comfy chair between sets.
Say goodbye to notoriously rickety and time-consuming set ups (here's looking at you, seal rows and hip thrusts) and hello to a 30 second setup and exceptional muscle targeting.
With 7 adjustable positions, plenty of head room, 2.25" thick pad, and a beefy 500lb capacity, you'll wonder how you ever lived without it.
Select the seal row pad that corresponds with the uprights and hole size of your power rack.
£179.99+ ADD -
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.
Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.
- 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.
- Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
- Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.
IMPORTANT: The Spotter Arms have a weight capacity of 800lb/362kg (60mm) & 1,000lb/453kg (Hydra & Manticore).
£119.99+ ADD -
Leg Curl/Leg Extension
Leg Curl / Leg Extension Rack Attachment
Economically isolate your quads & hammies to build a nice set of wheels.
The Leg Extension/Curl Rack Attachment offers a machine-like feel and stability without taking up valuable real estate in your home gym. This beefy attachment has a weight plate capacity of 250lbs and a user capacity of 250lbs.
The Leg Extension/Curl unlocks seated leg extensions, so you can blast your quads but don't forget your hammies! They can be isolated one at a time with standing single-leg hamstring curls for some juicy hams worthy of Sunday dinner. Throw on some resistance bands for tension you can cut with a knife (which we do not recommend).
Choose the Leg Extension/Curl Power Rack Attachment that coordinates with your power rack uprights and hole size.
IMPORTANT: Your power rack MUST be bolted down when using the Leg Extension/Curl to ensure user and equipment safety. For maximal stability, use this attachment on the inside of your rack.
£319.99+ ADD -
Lever Arms + Open Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury. Pull-up bar attachments will not fit on your lever arms when added to an All-in-One Trainer due to the width of the All-in-One uprights.
X OUT OF STOCK -
Lever Arms + Closed Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury. Pull-up bar attachments will not fit on your lever arms when added to an All-in-One Trainer due to the width of the All-in-One uprights.
£249.99X OUT OF STOCK -
Shoulder Boulder/Chest Fly Attachment
Shoulder Boulder/Chest Fly Attachment
Build boulder shoulders and poppin’ pecs for that iconic V-taper look!
Dumbbell shoulder and chest isolations suffer from inconsistent resistance, but the Shoulder Boulder’s design provides smooth, controlled movement with a superior resistance profile.
A standalone rear delt/chest fly station takes up a whopping 5-foot x 5-foot footprint (or more), while this rack attachment mounts to your rack to save space. Easily adjust its height on your power rack for the ideal fit.
This nifty unit uses weight plates, saving you money. Plus, easily micro-load the smaller muscles of your shoulders to minimize injury and get better gains!
While it doesn’t beat a cable machine for chest flies, the Shoulder Boulder comes in as a close second. Set it low & wheel over a bench (or mount a Seal Row Pad) for better chest flies that keep the tension exactly where it belongs: on your pecs.
With the new tightener knob and updated UMHW lining, the new 3" x 3" Shoulder Boulder fits securely on any 3" x 3" (75mm x 75mm) rack.
The 2.3" x 2.3" Shoulder Boulder is compatible with any 2.3" x 2.3" Cable Towers, All-in-One Trainers, or Power Racks with 2.3" x 2.3" (60mm x 60mm) uprights.
IMPORTANT: For user & equipment safety, ensure your rack or cable tower is bolted down or otherwise secured. Tighten the spin lock before each use. Locking on your weight plates with collars is highly recommended.
X OUT OF STOCK -
Rack Attached Basketball Hoop w/ Ball
Rack Attached Basketball Hoop w/ Ball
Turn your home gym into a basketball playground with the rack-attached basketball hoop! Perfect for squeezing in some extra fun between sets, this rack attachment is designed to mount directly to any Bells of Steel Cable Tower or Power Rack (and should fit our competitors', too.)
Easy installation means you and your kiddos can swish shots faster than you can say "game on.” The mounting bracket fits 3” x 3” (76.2 mm) tubing with ⅝” or 1” holes (Hydra and Manticore, or competitors' racks) and original Bells of Steel 2.3" x 2.3" (60 mm) racks. Mounts vertically or horizontally to fit crossmembers or uprights, respectively.
Includes:
- Net, backboard, and rim
- Inflatable mini-basketball
- Ball storage bag
- Ball pump
- Mounting bracket
- 5/8" Bolt
- 5/8" Nylon Washer
- 1" Nylon Washer
V2 Improvements:
- Nylon bolts for less vibration and wear over time
- Improved mounting bracket for less wobble
- Improved net (shorter and better quality)
- Compatible with all Bells of Steel Racks and True 3" x 3" (76.2 mm) competitor racks (check competitor specs for cross-brand use)
IMPORTANT: Wrenches not included. Ensure the hoop and your rack are bolted down securely before use, and be mindful of any nearby equipment or obstacles. Dunking is OK but hanging from the rim could result in breakage. Play safe!
£89.99X OUT OF STOCK -
Cushion and Utility Seat for Hydra
Utility Seat for Hydra/Manticore
Step ups? Check. Seal Rows? Check. A place to scroll through Instagram between sets? Check check. The Utility Seat tucks conveniently in your 3"x3" rack for a versatile, easy-to-move solution to exercises like split squats. Yeah... you don't have an excuse to skip those now. Sorry about that.Bolt down the optional bench pad for comfort during hip thrusts, seal rows or Instagram reps, and adjust the height as needed by popping out the hitch pins, then adjusting the safeties, and popping them back in. It's like if your favorite weight bench and an elevator had a very flat, stable baby. Weird analogy...moving on!The seat is steel-reinforced wood, so it doesn't require every morsel of your strength to move. And when you're done, don't worry about wheeling back and forth like you're trying to do a 25-point turn in a semi-truck. Just detach your bench and tuck it out of the way until next time. That's a big 10-4 on convenience.IMPORTANT: Fits TRUE 3"x3", 49-inch width racks with 5/8" or 1" holes.
£259.99X OUT OF STOCK -
Wrist Roller and Rack Attachment
Wrist Roller and Rack Attachment
This wrist roller will make you cry in pain—and you'll be happy about it!
Build your forearms and develop your grip strength either as a stand-alone piece of gear or grab the optional rack attachment bracket to connect it to your 2.3" x 2.3" power rack or TRUE 3" x 3" rack for next-level isolation.
The handles are lightly textured for comfort with a convenient center channel so your strap doesn't run amok. Throw on a weight plate, choose from 10 adjustable strap lengths, and feel the burn!
IMPORTANT: Ensure you select the correct rack attachment bracket for your power rack upright size.
£84.99+ ADD -
Split Squat Leg Roller Rack Attachment
Split Squat Leg Roller Rack Attachment
The space-saving Split Squat Leg Roller Power Rack Attachment easily mounts to your power rack for more comfortable split squats, glute-ham work & more!
Forget about using a bench. Just pop in and tighten this simple rack attachment wherever you like on your uprights and let the torture begin!
The thick foot pad offers the only comfort you'll experience during Bulgarian split squats, Nordic curls, and more. Plus, the star knob nut adds an extra level of security so you can't run away... you'll feel safe and confident with every rep.
Choose the Split Squat Leg Roller Power Rack Attachment that coordinates with your rack uprights and hole size.
IMPORTANT: All types of the Split Squat Pad Version 2.0 feature an open bracket with a threaded pin & star knob instead of a closed bracket with a drop-in pin & hitch pin like the original.
£69.99+ ADD
Storage
-
12" | 30cm Utility Horn
Utility Horn Rack Attachment
The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates, bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals.
The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.
Utility Horns allow you to fit more onto your power rack, taking up only one hole on the upright (compared to bolt-on plate pegs, for example, that use two holes to mount).
As a bonus, you can use it for a step-up to reach the pull-up bar on a rack that's a bit too tall for you, or to help you do one more set of negative pull-ups.
Need a higher weight capacity for your plates? Check out all of our Weight Plate Storage options.
IMPORTANT: Choose the utility horn that matches rack uprights & hole size.
£21.99+ ADD -
Vertical Barbell Holder
Vertical Mount Barbell Holder Rack Attachment
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights.
Two bolts offer easy mounting, while an inner liner protects your barbell.
The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't).
Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
IMPORTANT: If your ceiling is less than 9 feet high, you may find using the Barbell Holder challenging with a standard barbell - please keep this in mind prior to purchasing.
£34.99+ ADD -
5" | 13cm Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
£37.99+ ADD -
13" | 33cm Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
£44.99+ ADD -
Change Plate Pegs
Change Plate Storage Pegs
Keep your change plates conveniently stored and accessible to bust through your next plateau.
With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates.
Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us — it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking.
The Manticore version comes with UHMW protection for your uprights, and rubber stoppers to prevent your plates from hitting the mounting bolt heads.
Easy installation with two bolts; hardware is included.
IMPORTANT: Select the Change Plate Pegs that correspond with your power rack. Pegs are welded at an upward angle for safety, so please ensure you mount it correctly — the two pegs should be at the top.
£49.99+ ADD -
Pin Plate Pegs
Pin Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
These convenient drop-in pegs are adjustable in seconds with sleeves to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading.
Choose the plate pegs that fit your power rack. Sold in pairs.
- 2.3" version: 9" loadable length
- Hydra version: 12.5" loadable length
- Manticore version: 12.5" length
£44.99+ ADD -
Hydra Plate Peg Set
Bolt-On Plate Peg Sets
Get 5 pairs of bolt-on plate pegs (3 pairs of 13" pegs & 2 pairs of 5" pegs) to turn your power rack into a weight plate storage mecca.
Black powder coat protects your Olympic-sized weight plates while making them easy to load and unload. We've conveniently bundled them together to save you valuable time clicking (then wasted it by making you read this sentence).
Choose the plate peg set that fits your power rack measurements. Easy installation. Hardware included.
£194.99+ ADD -
Utility Hook
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.£11.99+ ADD -
Utility Hook 2x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.£21.99+ ADD -
Utility Hook 3x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.£29.99+ ADD -
Utility Hook 10x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.£89.99+ ADD -
Storage Basket
Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket!
This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment.
Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz
Mount it on your power rack, storage system, or wall studs.
IMPORTANT: Comes standard with rack-mounting hardware for tubing with ⅝” holes. Wall mounting hardware not included.£59.99+ ADD
Additional Options and Accessories
-
Single 24mm Wrench
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.£4.39X OUT OF STOCK -
Rack Attachment Pin
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.£6.59X OUT OF STOCK -
Concrete Anchors - Set of 8
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.£8.24X OUT OF STOCK -
Extra Logo Plate
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.£16.99+ ADD -
110mm Bright Zinc Bolt, Nut, Washers (Single Set)
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.X OUT OF STOCK -
120mm Bright Zinc Bolt, Nut, Washers (Single Set)
Hydra Hardware
Hydra Wrenches
The 24mm wrench fits all bolts used in the Hydra rack line-up.BOS Logo Tag
B.o.S logo plate promises a PR in pizzazz.Standard Bolt M16 - 110mm
Essential for constructing sturdy and reliable 4-Post Hydra racks.Long Bolt M16 - 120mm
Used specifically for the secure and stable assembly of 6-Post Hydra racks.Extra Long Bolt M16 - 130mm
Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds.Concrete Anchor Bolts
Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts. Sold in a set of 8.Rack Attachment Pin
Keep your Hydra rack attachments secure with more flair than a boring ol’ hitch pin.Smith Machine Flat Foot Adapters
Converts 1" holes to 5/8" holes. Designed for Kolossos builds with 30" crossmembers, Flat Foot Racks or Squat Stands with 84" or taller uprights.Flat Foot Adapters for 72” Squat Stands
Specifically designed adapter kit for Flat Foot 4 Post Racks and Squat Stands featuring 72" uprights. Bundle includes eight Smith Machine Flat Foot Adapters, along with four M16 130mm Bright Zinc Bolts, nuts, and washers for easy installation.X OUT OF STOCK -
Magnetic Rack Attachment Pin (5 Inch Shaft)
Magnetic Rack Attachment Pins
Replace your slow-adjusting hitch pins with sleek mag pins!
Magnetic head sticks to your power rack to lock in your rack attachments for total peace of mind.
The head is anodized aluminum and the body is stainless steel.
Mag Pin Type Compatible With Shaft Length Total Length Hydra Full Length 5/8" tubing holes 5.0" 5.75" Manticore Shorty 1" tubing holes 1.4" 2.2" Manticore Full Length 1" tubing holes 5.1" 5.9" X OUT OF STOCK
Rack
Rack Attachments
Storage Attachments
Hydra Squat Stand Builder (3" x 3", ⅝" Holes)
Product Features
-
![]()
EXTRA-STABLE DESIGN
The flat foot support system offers sturdiness to avoid accidental acrobatics. Its large contact surface area makes the rack extra stable for racking/unracking your bar, during pull-ups, and when doing dips. Bolting is recommended if using spotter arms, though.
-
![]()
PRACTICAL & PORTABLE
Compact. Efficient. We get it — sometimes, the simplest plan of attack is the most effective. You'll feel Braveheart-level freedom with a top-mounted adjustable pull-up bar. Plus, it's portable! Just crouch inside, grab the uprights, stand up, then walk it where ya want it.
-
![]()
WIDE-OPEN SQUATTING
Need room for your inspiring and not-at-all embarrassing post-PR dance? Squat Stands are perfect for those who can't be tamed by the constraints of a 4 Post rack and want the footwork space that our classic Squat Stands can't offer.
Product Details
This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon.
Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem! Built with modular components, so you can expand it later with Hydra components into a larger Hydra rack to accommodate a new home gym space or team workouts with your swolemate. Compatible with all Hydra rack attachments, like the hyper-versatile Hydra Lat Pulldown.
Awarded Garage Gym Reviews' Best Squat Rack with Pull-Up Bar in 2024!
IMPORTANT: The Hydra series of power racks are TRUE 3" x 3" tubing with 5/8" holes, so only Hydra attachments & non-B.o.S. attachments made precisely for 76.2mm x 76.2mm uprights with 5/8" holes will fit.
PRODUCT SPECS
| General | |
|---|---|
Total Length (Depth) |
|
Total Width |
|
Total Height |
|
Rack Pin |
|
|
|
|
| Construction | |
Upright Specs |
|
Hole Size |
|
Hole Spacing |
|
Steel Thickness |
|
Coating |
|
Weight Capacity |
|
- JJoshVerified ReviewerRated 5 out of 5 stars8 hours agoHydra Squat Rack - Best thing I've ever bought
This is an amazing piece of kit and is fantastic quality.
I was debating (agonising) over all the various brands and types of racks/power racks available for months. I eventually found bells of steel and their customer service at answering questions was from someone who actually knew their equipment and did weightlifting themselves rather than a generic response.
I was expecting this to shake more but it is rock solid. I'm using it for both barbell and calisthenics, for calisthenics I'm not doing any fast dynamic movements but if I was and if it felt unstable all I'd need to do is attach it to the ground.
But for pull-ups/ab raises/ring rows/ring dips and holds, for my weight, the rack is completely solid. This is with the adjustable pull-up bar too!
Love it! Easy to assemble, super solid and feels premium. Really like the company dynamic too with all the helpful videos and responses.
- JCJacob C.Verified BuyerRated 4 out of 5 stars2 years agoGreat Rack at a Great Price, Packaging Could Be Improved
I scoured all the options for racks on the market and eventually settled on the BoS Hydra because it seemed to be the best value 3x3 rack at the 90" height I needed it to be and the base width I needed it to be - not to mention I can easily expand it as my fitness journey progresses. I am mainly using it as a super-expensive pull-up bar for bodyweight and calisthenics exercises right now and it's plenty stable with the 62" flat foot attachments without being bolted down. I really appreciated that I could order the rack without the J-cups that I won't be using anytime soon and not have to pay for that part of the build. I'd have liked the pull-up bar to have a little more texture to it, but that's nothing I can't improve on my own inexpensively.
My one and only gripe is the packaging. A couple of the boxes containing the parts arrived in pretty rough shape, with the parts completely exposed and the powdercoating scuffed and chipped. I think the packaging could be improved by increasing the size of the box just a bit and adding a little extra padding around the corners of the uprights so that the sharp edges of them aren't right up against the cardboard and as likely to burst through the cardboard and become entirely exposed during transit.
Bells of Steel CanadaHi Jacob, Thank you for reviewing our rack today. We are so pleased to hear you have had a positive experience buying from us and we hope we can serve you again soon. We will certainly put into consideration the packaging in the future as well, thank you for your feedback. Sincerely, Marcus & the BoS team
- THTyler H.Verified BuyerRated 4 out of 5 stars3 years agoBest rack for the price
I love this rack I got it during the presale with a couple of attachments and it’s one of the few squat stands I feel comfortable going heavy on instead of needing a full power rack. The spotter arms for it have already saved my life a few times. My only complaints are that because there’s no UHMW on the inside of the attachments they have scratched it a bit in some places and one of the roller cups didn’t have a bolt all the way in for the UHMW pad which scratched the coating on one of bars until I noticed and makes me a little concerned about corrosion in the future. It’s still the center of my gym though and my favorite piece of equipment already trying to decide which attachments to buy next
Bells of Steel CanadaHey Tyler,
Thank you for the review on our Hydra Squat Stands and we appreciate the feedback on the attachments and will work to improve our designs.
Yours in strength,
William & the BoS crew
- AAnonymousVerified BuyerRated 5 out of 5 stars3 years agoSolid and Sturdy
I have been pumping iron for more than 40 years. I know weight lifting equipment. This rack is solid. This rack is sturdy. It is a beast. I can do pull ups on it without it moving. I work out with gymnastic rings (beginner) hung from the pull up bar. The rack does not move or shake. I need that kind of confidence as I am a large individual (235 lbs). I buy quality and I seek value. I got both with this purchase.
Bells of Steel CanadaHey there,
Thank you for the review, We are happy to have impressed a 40 year iron pumper with our new Hydra 3 x 3 Inch Squat Stand! We hope you enjoy all the gainz you make!
Yours in strength,
William & the BoS crew
- AAnonRated 5 out of 5 stars2 years agoSatisfied
Wanted to buy this solely for calisthenics. Was worried about the stability of the thing, so I went directly to the showroom to try it out (highly recommend this). Purchased it yesterday, and I'm very satisfied with the purchase. The metal seems strong / heavy-duty and the stand does not shake whatsoever for me (I'm 5'8", around 65-70kg, and using this for regular calisthenics- i.e. no momentum / kipping- for context). I like the texture and thickness of the pullup bar. 10/10 would buy again.
Bells of Steel CanadaHi there,
Thank you so much for your review of our hydra 3x3 squat stand. We are overjoyed you have enjoyed your new squat stand and we wish you the best.
Sincerely,
Marcus & the BoS team
